Adjustment program EPSON L3050, L3070 (reset west ink)

Attention! MANDATORY TO READ FULLY!

EPSON L3050, L3070 Adjustment program Ver. 1.0.3 build 6528 (EURO) is a service program for the specified printer models, the program allows you to reset the diapers counter (testing, absorber), prescribe the printhead ID, initialize the printer and other functions.

Features of the program:

Interface language is English
Reset only via USB cable, does not work via Wi-Fi
Internet is not needed for activation and operation of the program.
The program is original, complete, all functions are activated in it.
The program resets the Main pad counter and Platten pad counter for the following printer models:
1) Epson L3050
2) Epson L3070
The program will work only on one computer for which you will receive an activation key.
Windows, you can reinstall and re-activate the program received activation key.
The configuration of the computer cannot be changed, if you change the hard disk or processor of the computer, the program will no longer be activated and you will have to buy the activation key again.
The program does not work on Mac OS
Some antiviruses can swear on the program, so while working with the program it is worthwhile to disable them or add the program to the exclusions.
Note, we will not always send the activation key instantly, because This procedure is carried out in manual mode, often it takes from 5 to 30 minutes, on weekends there may be a delay of up to 1 hour.
 
Activation procedure EPSON L3050, L3070 Adjustment program Ver. 1.0.3 build 6528:
After paying for the program and downloading it, COPY THE ARCHIVE WITH THE PROGRAM ON THAT COMPUTER WHERE THE PROGRAM WILL WORK.
Be sure to extract the program from the archive using an archiver program, for example, Winrar.
Launch the Adjprogr.exe program by double-clicking. A window will appear with the ID number, copy by clicking the “OK” button in this window and send it to our email [email protected] with the subject “I bought an Epson L3050, L3070 (EURO) program for you Adjustment program”:
EPSON L3050, L3070 Adjustment program Ver. 1.0.3 build 6528 (reset pampers)

We will send you an activation key in response, which you copy to the folder with the program, restart the program. The program is ready to go!
You keep the activation key in a safe place, in case you need to activate again:

Next, you work with the program as usual, as described for example here.